Air Blowers
Air Dryers
Air Filtration
Air Flow Controllers
Air Management
Air System Audits
Breathable Air
Cooling Towers
Compressed Air
Compressor FRLs
Compressor Networking
Drains & Traps
Hose & Fittings
Leveling & Isolation
Lubricants
Nitrogen System
Oil/Water Separation
Parts Search
Receiver Tanks
Remote Monitoring
Safety Valves
Quincy Compressor
Quote Request
Vacuum Pumps
Trans Air Piping
Water Cooling
Water Treatment

Design by:
ZeusDesign.us
2004 Golden Web Award Winner

Air Blowers - Regenerative and Radial Blowers from Airtech and Becker.

Airtech and Becker air blowers are ideally used as an alternative for air pumps and lobe blowers. C.H.Reed provides complete system design, engineering, sales, service, parts and support for the complete lines of Becker and AirTech air blowers.

• Airtech Regenerative Blowers
• Becker Radial Blowers

Airtech Regenerative Air Blowers

The 2BH series regenerative vacuum/pressure blower is an ideal alternative to standard rotary vane pumps and PD/rotary lobe blowers; it's innovative light weight and compact design adds to the ease of operation. The 2BH can quickly be added to your system with its easy to install close-coupled construction. The cool running outboard bearings increase service life. Free is a word that everyone likes to see when they are looking at a product, and this one is OIL FREE, MAINTENANCE FREE, and operates at a maximum 70 dB (A). The 2BH has an operating capacity range of 10-1500 CFM and can achieve an end vacuum up to 20" Hg or a pressure of 13 psig.

From their design features and performance data blowers of the RV 2.23 Series are especially suitable as circulators for CO 2 -lasers of medium to large outputs. Flow volumes of 1000 to more than 4000 m 3/h and pressure ratios oft 1.1 to 2.0 are available from these blowers. In addition because of their high degree of gas tightness and cleanness they are suitable for use as circulators for rare gases (e.g. helium), or for example for pumping protective gases. The radial blowers are supplied with protective flanges for the suction and discharge connections to DIN 28404. For the isolation of vibrations the blowers arc equipped with four special rubber feet.