Air Blowers
Air Dryers
Air Filtration
Air Flow Controllers
Air Management
Air System Audits
Breathable Air
Cooling Towers
Compressed Air
Compressor FRLs
Compressor Networking
Drains & Traps
Hose & Fittings
Leveling & Isolation
Lubricants
Nitrogen System
Oil/Water Separation
Parts Search
Receiver Tanks
Remote Monitoring
Safety Valves
Quincy Compressor
Quote Request
Vacuum Pumps
Trans Air Piping
Water Cooling
Water Treatment

Design by:
ZeusDesign.us
2004 Golden Web Award Winner

CP - Chicago Pneumatic - Air Tools, Parts, CVI Controllers, ER Assembly Tools, Power Impacts, Plug & Tighten Tools and Power Sanders.

C. H. Reed, Inc. provides the complete line of CP Chicago Pneumatic air tools, and the advanced Desoutter production tools, including the DC Assembly range, Nut Runners, Torque Multipliers, Self Feed Drills, and the world famous Plug and Tighten tools.

C. H. Reed, Inc. is a factory authorized SERVICE and REPAIR center for CP Chicago Pneumatic tools!

• CVI Controllers
• CVI Assembly Tools
• CVIP Plug & Tighten
• CD Redi Power Impact Guns
• Angle Grinder / Sander - Desoutter
• Redi Power Sanders    
  
  

CVI Controllers

• Easy to program
• Same Concept of programming for all controllers
• Large Screen with user friendly messages
• Huge memory gives ultimate flexibility: up to 250 cycles, 20 phases, and over 11,000 results stored!
• Easy set up for all applications from run downs, to sequence applications
• Integrated, internal PLC can be used for advanced process control
• Applications can be programmed either from the controller key pad, the CVIPC2000 software, or via a PLC
• Modularity; all controllers are available in a modular version, the modules
• Can be installed in a cabinet to drive a multi-spindle machine
  
  

ER Assembly Tools

The Innovative ER Tools have the highest power to weight ration of any tool on the market.

• Only <70 db(A)
• Ergonomically designed for comfort of use
  
• Designed to optimize productivity, they can be used on all joint types.
  
• Tool-integrated memory contains all parameters for calibration, maintenance and tool tracking`
  
• Tighten parameters allow for a ready-to-use “plug and play” tool

Tools available:


• Nut Runners
• Impacts
• Screw drivers
  
  

Plugs into standard 110V outlet (230V is available)

• Auto Program with self-learning mode
  
• Tamper proof torque programming, either directly on tool or from pocket
  PC
  
• Modular, Changeable outputs
  
• Torque Capacity up to 50 ft. lbs. (65Nm)
  
• 2nd lever start optional for tubenut applications
  
• Faster assembly cycle
  
• Significantly longer tool life
  
• Maintenance free brushless motor
  
• Gearbox durability tested to well over 2 million cyclesr
  
• Energy consumption is significantly less than traditional tools
  
• Ergonomic Design, Light, low noise, low torque reaction
  
  

CD Redi Power Impact Guns

Available in ¼”, 3/8” and ½” Square Drive

• Operator comfort: compact size, and low noise level
  
• Light weight tool
  
• Easy Forward, and Reverse button
  
• Cushion rubber grip integrated in the handle
  
• Quiet handle exhaust as low as 89 db(A)
  
• Super Power: twin dog clutch for high power to weight ratio
  
• High power from 450 Nm (331ft lb) to 1650 Nm (1217 ft lb)
  
• Durability: Twin dog clutch for durability
  
• Fewer parts and less maintenance
  
• Magnesium Clutch housing as strong as aluminum body
  
  

KA16 Angle Grinder / Sander Desoutter

• Powerful 1600 watts
• 25 Models for all applications
  
• 2,000 hours guaranteed Meantime Between Maintenance (MTBM*)
  
• Ergonomic Accessories included
  
• Optional high efficiency dust extraction system
  
• Use Standard metal cutting discs, and diamond blades on one tool!
  
• Equipped with a governed air motor that keeps the tool working with Maximum speed
  
• Comfortable use: Two trigger settings for maneuverability
  
• Fast Disc changes: One-key disc changing with spindle lock button
  
• 270° Multi-Position Guard provides maximum protection and comfort
  
  

Redi Power Sanders

• Ergonomic and lightweight to improve operator comfort
• Ergonomic shape for vertical and horizontal applications
• Random Orbital sander
• 152 mm (6”) pad mounted on the tool and 125mm (5”) pad Included hook & loop and PSA sanding pads
• Orbit: 2.5mm (3/32”), 5mm (3/16”), and 10mm (3/8”)
• Adjustable speed regulator
• 165 W (0.22hp) motor for high performance
  
• Round palm shape and contoured composite housing for operator Comfort
  
• Exhaust hose swivel (CV)
  
• low Vibration level <2.5 m/s2 on both pad sizes