Compressor FRLs - Filters, Regulators and Lubricators from ARO, Master Pneumatic and Midwest.
Aro, Midwest and Master Pneumatic provide filters,
regulators and lubricators for all types of industrial applications.
CH Reed is the authorized distributor for their complete lines,
parts and warranty repair.
Filter Service Indicators are standard on all
coalescing filters Every super-duty coalescing filter arrives complete
with convenient service indicator for easy onsite filter monitoring.
Indicator changes from green to red when element needs to be replaced.
Master Pneumatic regulators are made in a wide range of sizes to suit nearly all industrial requirements for pneumatic pressure regulation. Good pressure regulation is essential to the efficient use of pneumatic equipment. A compressor may supply air at 150 psig, but most of the equipment will operate best at lower pressures. The SENTRY, non-relieving, corrosion-resistant, Acetal-Body Water Pressure Regulators are designed to set pilot pressure of the water for the main valve in a sprinkler system. The MINIATURE, non-relieving, corrosion-resistant, Brass-Body Water Pressure Regulators are also available in the piston-type design (R53B models) and the diaphragm-type (R54B models) with 1/8 and 1/4 ports. Master Pneumatic Filters must be attended to on a regular basis in order to rid them of water and other contaminants. The use of an automatic drain is highly recommended because it greatly reduces the need for frequent individual attention. This is especially important if access to the filter is difficult, because difficult access makes it much more likely that regular maintenance will be overlooked.