Air Blowers
Air Dryers
Air Filtration
Air Flow Controllers
Air Management
Air System Audits
Breathable Air
Cooling Towers
Compressed Air
Compressor FRLs
Compressor Networking
Drains & Traps
Hose & Fittings
Leveling & Isolation
Lubricants
Nitrogen System
Oil/Water Separation
Parts Search
Receiver Tanks
Remote Monitoring
Safety Valves
Quincy Compressor
Quote Request
Vacuum Pumps
Trans Air Piping
Water Cooling
Water Treatment

Design by:
ZeusDesign.us
2004 Golden Web Award Winner

Industrial Cooling Tower Systems - Closed Loop, Open Loop, Chilled Water and RWD from Hydrothrift and MTA.

Industrial Compressor Air Cooling Systems provide assistance to prevent corrosion and control flow, pressure and temperature. Choose from a broad range of Hydrothrift and MTA products to find the cooling tower or system that's right for your application..

• Hydrothrift - Closed loop dry
• Hydrothrift - Closed loop evaporate
• Hydrothrift - Open loop evaporate
• Hydrothrift - Closed loop chilled water
• MTA - Industrial Process Cooling - RWD
  

Hydrothrift - Closed Loop Dry

A cost - efficient way to maintain consistent equipment cooling temperatures and prevent corrosion. Any heat - producing industrial process or equipment will benefit from the installation of this system. That's because the HydroThrift system removes heat from machines and processes continuously, cleanly and with little or no maintenance. Completely automatic operation and control of flow, temperature and pressure. HydroThrift CD cooling systems are two-component systems utilizing a compact pump package and a remote, air - cooled heat exchanger. The system is filled with a low - cost, water / glycol coolant mixture which is continually circulated under pressure through the process or machine. Operation is so simple, no assigned operator is needed. Pumps, heat exchanger and control package regulate temperature, flow rates and heat exchange using a fixed amount of coolant indefinitely. And because it is a self - contained system, you won't need to add or change water or glycol.

A cost - efficient way to maintain consistent equipment cooling temperatures with varying heat loads and environmental conditions. All water - cooled heat - producing industrial processes and equipment will benefit from the installation of this thermostatically controlled heavy - duty (CE) system. That's because it removes heavy heat loads from machines and processes by supplying coolant economically within 10 degrees F of ambient wet bulb temperatures. Continuously, efficiently and with minimum maintenance. Completely automatic operation, reliable control of temperature. The system is filled with a low-cost, water / glycol mixture which is continually circulated. Because it is a self - contained system, you won't need to add or change the glycol coolant which prevents freeze problems.

OE-type systems are more economical in terms of initial equipment costs; however, they may incur maintenance costs associated with scaling, fouling, and water treatment packages. OE-type systems are also operated where heat transfer fluids, such as glycols, are not allowed, and/or the cooling medium comes in direct contact with customer product, such as plastic and aluminum extrusions. Packaged Open Cooling Tower Systems (OE) include a cooling tower and a pump and control unit. The pump and control module includes pump(s), motor starter(s), and thermostatic controls for the tower fan motor(s). Operation is so simple, no assigned operator is necessary. The control package regulates temperature, flow rates, and heat exchange, using cooling tower water. Systems are available up to 2500 tons.

All water - cooled heat-producing industrial processes and equipment requiring coolant supply temperatures below those possible with an evaporative type cooling system are candidates for this thermostatically controlled heavy - duty (CW) system. That's because it removes heat from machines and processes by supplying coolant from 20 to 90 degrees F at the most severe ambient design conditions. Continuously, efficiently and with minimum maintenance.

The dry coolers of the series RWD include air to water heat exchanger, fan motors with axial ventilators and microprocessor control. They cool a water flow using ambient air only. They have been designed using innovative constructional technologies and solutions, this obtaining a range of machines endowed with high efficiency and a broad range of available capacities, with the possibility of customization and various different installation solution. A number of models have been designed to be installed in both the horizontal and vertical positions; in other cases, a special kit allows very simple, immediate installation.