Accessories
Agitators / Mixers
Airless Spray Guns
Batch Dispense
Booths & Access.
Breathable Air
Conveyors
Diaphragm Pumps
Dispense Stations
Drains & Traps
Dust Collection
Electrostatic Spray
Finishing
Fluid Filtration
Fluid Heaters
Fluid Regulation
Fluid Metering
Foam & Fiberglass
Gun Washers
Hose & Fitting
Man Lifts
Ovens
Paint Kitchens
Parts Search
Paint Shakers
Powder Spray
Pressure Tanks
Pressure Washers
Pumping Equip.
Quote Request
Reciprocators
Robotics
Solvent Recovery
Spray Booths & Access.
Spray Guns
Spray Equipment
Supplies
Surface Preparation
System Solutions
Training Tools
Trans Air Piping
Turbine HVLP
Two Component
Washers

Design by:
ZeusDesign.us
2004 Golden Web Award Winner

Guns Accessories- Gun accessories from Binks and DeVilbiss.

DeVilbiss products are used with equal success in the wood, aerospace, plastics, metal, and automotive industries by operators ranging from the industrial professional to the hobbyist. DeVilbiss equipment is used to spray a wide variety of solvent-based and waterborne coatings including single and dual component and low and high solids materials.

C.H. Reed sells, services and supports the complete line of Binks and Devilbliss spray gun accessories.

• Spray Gun Extensions
• Liter Aluminum Gravity Feed Cup
• Acetal Gravity Feed Cup
• Low Pressure Cup
• Aluminum Pressure Feed Cup
• Polyethylene Suction Cup
• Supplies
  

Spray Gun Extensions

For hard to reach locations. Attach to Spray Gun Models 95 and 2001. For conventional coatings. Air inlet is 1/4" NPS (m); Fluid inlet is 3/8" NPS (m).

You can trust C.H. Reed to provide the right solution for your spray gun accessories, every time!

DeVilbiss gravity feed cups are made of strong, lightweight acetal, or aluminum for durability. In addition, an integral drip check in the cup lid virtually eliminates leaks from the vent hole. These cups can be used with E-Z Liner disposable cup liners, which reduce clean-up time, solvent use, and also allow upside-down spraying. Order liner kit OMX-70-K48. Can be used with GFG, GTI and EXL gravity feed spray guns.

DeVilbiss gravity feed cups are made of strong, lightweight acetal, or aluminum for durability. In addition, an integral drip check in the cup lid virtually eliminates leaks from the vent hole. These cups can be used with E-Z Liner disposable cup liners, which reduce clean-up time, solvent use, and also allow upside-down spraying. Order liner kit OMX-70-K48. Can be used with GFG, GTI and EXL gravity feed spray guns.

Aluminum 1-quart low pressure, Teflon-lined for fast, easy cleaning. Requires KK-4980 for cup air regulation

KB II Series 2-quart cups feature a "pistol grip" carrying handle, and right- or left-handed design for comfort and ease of handling. An easy-open lid and wide cup mouth allow for fast filling and cleanup. KB II Series cups also feature a solvent-resistant check valve, a 0-30 psi air gauge, and a wide base for greater stability. KB II Cups are supplied with disposable cup liners, which reduce clean-up and solvent use. The unique lid liner also protects the underside of the lid, preventing check valve problems. Order KK-5051 disposable cup liner kit (20 each).

This 8 oz. cup combines an engineered resin lid with a translucent polyethylene cup that lets you see the liquid level. Lightweight and easy to clean, the non-staining cup has molded-in graduations for mixing ratios. Compatible with all solvents, it fits any suction feed gun with 1/4" NPS threads. Use an AD-404 adapter to adapt to spray guns with 3/8" NPS (M) inlets.