Accessories
AIMCO Air Tools
ARO Air Tools
Bosch Air Tools
Chicago Pneumatic
Sioux Air Tools
Assembly Tools
Auto Feed Systems
Bits & Sockets
Cordless Tools
Crimping & Cutting
Cylinders & Valves
Fasteners
Grinding & Sanding
DC Tools
Hoists & Lifts
Hose, Lifts, Reels
Hose & Fitting
Logic Controls
Parts Search
Pulse Tools
Quote Request
Radio Controls
Tool Balancers
Torque Measurement
Workstations

Design by:
ZeusDesign.us
2004 Golden Web Award Winner

Simonds Cutting and Crimping - Cut and Bend Tool, Power Pack Miniature Squeeze - Eze, Dyke Type Squeeze - Eze Jaws, Universal Crimp Tool, Crimp Master.

Simonds tools are designed to meet the demanding specifications of all industries and can be mounted either on robots or stationary work stations. Simonds hand held tools are ergonomic in design, helping to reduce injuries due to repetitive motion, cut back on operator fatigue and help increase product output.

• Cut and Bend Tool
• Power Pack Miniature Squeeze - Eze
• Dyke Type Squeeze - Eze
• Universal Crimp Tool
• Crimp Master
  

Cut and Bend

Air-powered cut and bend tool cuts components on P.C. boards 1/16” above the surface and bends them over tight to the board. The tool is small (5 1/2” long x 1 1/4” diameter) and lightweight (8oz.). Constructed of durable aluminum, the maximum inlet air pressure is 80 psi. Seven interchangeable cut and bend heads are available for different diameter components with 20°, 30° or 45° working angles. Heads are made from hardened tool steel and are easily replaceable. There are also four heads available for shorter layover (1/32” max. layover) in 20°, 30° and 45° angles.

This miniature power pack is for use with the cutting, crimping and bending jaws found below. The tool is small (5” long x 1 1/4” diameter) and can be operated at air pressures of 60-80 psi, producing 100 lbs of end cutting force. A built - in adjusting screw controls the opening of the jaw sets. Jaw sets are sold separate.

These jaws are for cutting wires flush or semi - flush. All jaws are secured in the housing by a shouldered pivot-screw with recessed hex head and can be reversed to facilitate right or left handed use. “CH” indicates case hardened jaw sets. As with all Simonds jaw sets, they may be factory re-sharpened for extended life and lower production costs.

Our universal crimp tool is a complete system, including an SP-004F power pack, universal crimp jaw and housing (die sets separate), bench stand and footswitch. Thirteen interchangeable crimping die sets are available for processing connectors in applications such as COAX, stranded wire, HEX - style and open \ closed barrel. The UC-90 can accommodate optional power packs up to our SP-008F for added crimping pressures. An optional locator shelf is available to assist in uniform crimping.

The CM-3 Crimp-Master secures solder - less terminals to solid or stranded, bare or insulated wire, to meet most requirements of several MIL specifications. It fits on to our SP-002 to SP-005 Power Packs (based on power required for crimp), and features a durable aluminum housing with hardened tool steel jaws. Most of the crimping is performed with “F” style power packs.