C.H. Reed Stock Clearance and Specials

Part Number: 4152032713    VSD 25D 175 460/60 TM

• Qty. in Stock: 1
• Duty Cycle: 100% Continuous Duty
• Voltage Frequency: 60Hz
• Phase:  Three, Three
• Voltage: 460/3/60hz
• Connection Size: 1" NPT
• Sound Level: 70dBA
• Configuration: Horizontal
• CFM Range: 100-149
• Drive Style: Variable Speed Drive / VSD
• CFM @ 100 PSI: 125.1
• Tank Size: 132 Gallons
• Integrated Dryer: Yes
• Horse Power: 25
• Max Pressure (PSI): 175
• Dimensions: 77"L x 33"W x 73"H
• Weight: 1290 lbs

The Chicago Pneumatic CPVSd 25D TM is a 25hp variable speed direct drive compressor with integrated refrigerated air dryer and is mounted on a 132 gallon receiver tank. This 25hp VSD compressor allows you to save operating costs when your application does not require the compressor's full capacity. The ES4000 microprocessor controller automatically maintains your desired system pressure and provides only the air that your system requires on a smooth consistent basis. Variable speed technology coupled with a direct drive transmission results in energy savings of up to 30%. The CPVSd 25D TM compressor can function as a stand-alone machine or networked to a base-load compressor where it can function as a trim machine.

This CPVSd 25D TM is a 25hp varible speed drive compressor. It is rated to displace up to 125.1 cfm and will regulate its output between 28-125.1 cfm depending on your plants requirement and pressure setpoint. You can easily adjust the pressure via the microprocessor controller.

The CPVSd 25D TM series is managed by the ES4000 Advanced, an electronic control unit programmed for energy saving operation with intelligent shutdown. The ES4000 Advanced control can be programmed to shutdown in accordance with your plant air demand and reduce long periods of unloaded operation, reducing power cost. The ES4000 Advanced control feature can save a customer thousands of dollars per year.

Compressed air drives your processes and with it, the operational efficiency and performance of your company. With this principle in mind, Chicago Pneumatic has designed the CPVSd, a range of variable speed, oil-injected screw compressors with IP55 TEFC motor technology to offer your business a compressed air solution that adds value and saves you money at the same time.

The internal factory part number for this compressor is 4152032713. This model comes mounted on a 132 gallon ASME horizontal air receiver tank with a safety valve and tank drain. This model runs at a very low noise level of only 68 dBA.

Savings Through Energy Features:

Energy cost represent about 70% of the total operating cost of your compressor over a five (5) year period. That is why reducing the operating cost of a compressed air solution should be a major focus. The CPVSd 25 Variable frequency driven compressors can “cut” your energy bill by up to 30%.

Quality Air Package Included – The CPVSd 25D TM includes an integrated refrigerated air dryer pre-installed and plumbed with the compressor package. This eliminates the need for a separate air dryer saving on installation cost and floorspace.

4152055803 - Mark Compressor MSU Series Rotary Screw Air Compressor
4152055803 MSU10 145 TRIV/60 T60

• Part Number: 4152055803
• Configuration: Tank mount
• Horsepower: 10 HP
• Capacity: 34.1 CFM
• Pressure: 145 PSI
• Tank Size: 60 gallon
• Dryer: None
• Voltage: 208-230/460/3/60
• QTY: 1

4152023475 - Mark Compressor MSU Series Rotary Screw Air Compressor

4152023475     MSU 15 145       TRIV/60 T120

• Part Number: 4152023475
• Configuration: Tank mount
• Horsepower: 15 HP
• Capacity: 45.1 CFM
• Pressure: 145 PSI
• Tank Size: 120 gallon
• Dryer: None
• Voltage: 208-230/460/3/60
• QTY: 1

Iwata 5807 Supernova LS400-1401 Gold Base Spray Gun Kit, 1.4mm, 700 ml Aluminum Cup

Manufacturer’s Description: When we talked about a new spray gun, we decided we needed something and our customers needed something new. Therefore, we enlisted the help of the world-renowned design firm Pininfarina famous for their state of the art automobile design. Anxious to see how they would handle a spray gun, the design far exceeded our expectations. After the gun design was complete, we incorporated our advanced atomizing technology and the “SUPERNOVA” was born. The gun combines our superior atomization control with production speed & ergonomics.

The SUPERNOVA delivers a consistent droplet size when atomizing which combined with the flat even pattern helps reduce common application issues.

Cup angle design guarantees perfect balance regardless size. Air caps larger thread pattern makes it both robust and easy to remove and is designed with low maintenance in mind.

• New in the box but discontinued by Anest Iwata
• HVLP Paint Spray Gun
• Spray Gun Model # LS400-1401
• 700ml Aluminum Cup
• 1.4mm nozzle
• Atomizing PSI 19
• 10.73 CFM
• 130ml
• Pattern 330 mm
• Automotive Refinishing / Base Coats / General Purpose
• List price is $874, we’re asking $560 + $10 Shipping
• We have 2 of these kits available

Iwata 5817 Supernova LS400-1402 Clear Coat Silver Spray Gun Kit, 1.4mm, 700 ml Aluminum Cup

Manufacturer’s Description: When we talked about a new spray gun, we decided we needed something and our customers needed something new. Therefore, we enlisted the help of the world-renowned design firm Pininfarina famous for their state of the art automobile design. Anxious to see how they would handle a spray gun, the design far exceeded our expectations. After the gun design was complete, we incorporated our advanced atomizing technology and the “SUPERNOVA” was born. The gun combines our superior atomization control with production speed & ergonomics.

The SUPERNOVA delivers a consistent droplet size when atomizing which combined with the flat even pattern helps reduce common application issues.

Cup angle design guarantees perfect balance regardless size. Air caps larger thread pattern makes it both robust and easy to remove and is designed with low maintenance in mind.

• New in the box but discontinued by Anest Iwata
• HVLP Paint Spray Gun
• Model # LS400-1402
• 700ml Aluminum Cup
• 1.4mm nozzle
• Atomizing PSI 19
• 10.73 CFM
• 130ml
• Pattern 320 mm
• Automotive Refinishing / CLEAR Coats / General Purpose
• List price is $874, we’re asking $560 + $10 Shipping
• We have 1 kit available

Iwata WS400-1301C Non-HVLP Spray Gun with 1000ml Cup and 1.3 Nozzle

Manufacturer’s Description: When we talked about a new spray gun, we decided we needed something and our customers needed something new. Therefore, we enlisted the help of the world-renowned design firm Pininfarina famous for their state of the art automobile design. Anxious to see how they would handle a spray gun, the design far exceeded our expectations. After the gun design was complete, we incorporated our advanced atomizing technology and the “SUPERNOVA” was born. The gun combines our superior atomization control with production speed & ergonomics.

The SUPERNOVA delivers a consistent droplet size when atomizing which combined with the flat even pattern helps reduce common application issues.

Cup angle design guarantees perfect balance regardless size. Air caps larger thread pattern makes it both robust and easy to remove and is designed with low maintenance in mind.

• New in the box but discontinued by Anest Iwata
• Non-HVLP Paint Spray Gun
• Model # WS400-1301C
• 1000ml Aluminum Cup
• 1.3mm nozzle
• Atomizing PSI 29
• 12.53 CFM
• 170ml
• Pattern 365 mm
• Automotive Refinishing / CLEAR Coats / General Purpose
• List price $874, asking $560 + $10 Shipping

3M Particulate Respirator 8511 N95 (10 per box) features the proprietary 3M Cool Flow Valve and helps provide comfortable, reliable worker respiratory protection. It is ideally suited for hot/dusty work settings that require long periods of wear.

• New in the box – 10 per box
• NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles
• 3M™ Cool Flow™ Exhalation Valve helps reduce heat build-up inside the respirator
• M-Nose clip adjusts easily for fewer pressure points and greater comfort.
• Braided headbands two-strap design with dual point attachment helps provide a secure seal
• 3M Cool Flow Exhalation Valve reduces heat build-up inside the respirator
• Spacious and durable
• Designed to increase comfort and wearability
• Advanced Electret Media is designed for ease of breathing
• We have 8 boxes available

ARO 670003 Grime Fighter Air-Operated Diaphragm Pump

The air-operated pump made with polypropylene, virgin PTEF, and Santoprene. Designed for low-pressure use with harsh chemicals. 7 GPM max flow rate, 1:1 ratio, 100 PSI max pressure.

Product Description: 100 PSI Air-Operated Diaphragm Pump

The Aro 670003 Grime Fighter Pump is an air-operated pump that uses a diaphragm to build pressure. Made with polypropylene and has virgin PTFE and Santoprene wetted materials. Pump harsh car wash fluids without concern about damage.

Details and Specifications:

• Air Inlet: 1/4" NPTF
• Fluid Inlet: 1/2" NPTF
• Fluid Outlet: 1/2" NPTF
• Max Pressure: 100 PSI
• Weight: 9 lbs.
• Ratio: 1:1
• Max Flow: 7 GPM
• Max Temperature: 150° Fahrenheit
• Qty. available: 4
• List Price: $825
• Sell Price: $459.99

• Brand: ARO
• Manufacturer Part Number: 666053-3EB
• Power Source: Air
• Housing Material: Polypropylene
• Diaphragm Material: Santoprene
• Valve Material: Santoprene
• Check Seat Material: Polypropylene
• Center Section Material: Plastic
• Pump Assembly Type: Bolt
• Manifold Connection: Single Port
• Fluid Intake Connection: 1/2 in NPTF
• Fluid Discharge Connection: 1/2 in NPTF
• Max. Flow Rate:13.1 gpm
• Manifold Connection Type: NPT
• Flow Rate @ 40 psi: 9.2 gpm
• Flow Rate @ 50 psi: 10.2 gpm
• Flow Rate @ 60 psi: 11.1 gpm
• Flow Rate @ 70 psi: 12.1 gpm
• Flow Rate @ 80 psi: 12.6 gpm
• Flow Rate @ 90 psi: 12.9 gpm
• Flow Rate @ 100 psi: 13.1 gpm
• Max. Discharge Pressure: 100 psi
• Max. Feet of Head: 289 ft
• NPSHr: 27.5 ft of head
• Max. Solid Dia.: 0.09 in
• Max. Viscosity: 15,000 cps
• Min. Media Temperature: -40 °F
• Max. Media Temperature: 225 °F
• Chemical Compatibility: Ammonium Hydroxide; Calcium Carbonate; Diesel Exhaust Fluid; Hydrochloric Acid 10%; Hydrochloric Acid 20%; Hydrochloric Acid 30%; Hydrochloric Acid 40%; Potassium Hydroxide 50%; Sodium Hydroxide 20%; Sodium Hydroxide 50%; Sodium Hypochlorite 5%; Sodium Hypochlorite 10%; Sodium Hypochlorite 20%; Sulfuric Acid 10%; Sulfuric Acid 20%; Sulfuric Acid 30%; Sulfuric Acid 40%; Sulfuric Acid 50%; Sulfuric Acid 60%; Sulfuric Acid 70%; Water
• Air Consumption: 20 scfm
• Air Inlet: 1/4 in NPT
• Rated Air Pressure: 100 psi
• Valve Type: Ball
• Priming: Self-Priming
• Media Intake Location: Center
• Media Discharge Location: Center
• For Use With Potable Systems: Yes
• Nameplate Voltage: N
• Overall Height: 11.3 in
• Overall Length: 8.4 in
• Overall Width: 6.5 in
• Series Family: Compact
• Series: 66605X

Qty. available: 2

Price: $800.63 each plus shipping

Qty. 1

Price: $280.01 + shipping

Anest Iwata IW4560 (W-100-132G SUCTION FEED SPRAY GUN)

• Qty. 1
• Price: $193.73 + Shipping

Anest Iwata 5370B | Lph101-144Lvg Gun Only. Nozzle Size: 1.4 Usage: Base Coat, Clear Coat, Single Stage Woodwork, Metal.

• Qty. 1
• Price: $386.66 + Shipping

IWATA 5610 WA-200 WA200-152P Full Pressure Feed Automatic Spray Gun

5610 WA-200 WA200-152P AUTOMATIC SPRAY GUN

ANEST IWATA automatic spray guns are available in various configurations to suit a wide range of applications and processes. Our small size & full size allow end users to accommodate multiple applications.

ANEST IWATA automatic spray guns are suitable for mass production with automatic painting equipment, reciprocators or robotic painting.

Fluid Fitting: 3/8"BSP
Air Fitting: 1/4"BSP

Price: $558.34 + Shipping
Qty. 2

Graco L60M10 Pro Xp60 Air Spray Manual Electrostatic General Gun Model, 60 kV, 0.055 in (1.5 mm) nozzle, smart display, standard coatings

This 60 kV electrostatic paint spray gun comes in a compact, lightweight package with smart technology.

Smart controls help you analyze performance, adapt voltage, and troubleshoot easily.
Built-in durability means each gun is designed to last – and made in the USA.
High transfer efficiency equals less waste, saving you money on material.

• Qty. available: 1
• Price: $6,743.75

PRO XP GUN, ES, 85KV, AA, SMART

Graco H85M10 Pro Xp85 Air Assist Manual Electrostatic Gun, 85 kV, with smart display, standard coatings, includes AEM or AEF tip of choice

Pro Xp85 kV air-assist gun maximizes transfer efficiency and lowers cost of ownership. Pro Xp85 AA gun line includes Standard and Smart models.

• High quality spray performance with a one-piece aircap and variety of spray tips
• Alternator speed indicator light ensures your turbine speed is running at the correct level
• Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
• Internal power supply reduces operator fatigue with no heavy cords to slow you done
• Rugged, dependable design supported by a three year warranty
• Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements
• Qty available: 1
• Price: $8,222.50

• Qty. available: 1
• Price: $366

Anest Iwata Usa Inc 4562B | W101-132G Gun/Cup(Pc5)

• Qty. available: 2
• Price: $307.13